The installation process of a CATSU Tiltrotator on an excavator involves several steps.

The installation process of a CATSU Tiltrotator T06 on a Komatsu excavator involves several steps. It's important to note that this should be carried out by a professional or under professional supervision, as incorrect installation can result in equipment damage or safety risks. Here's a general guide:




1. Preparation: Before starting the installation, ensure you have all necessary tools and components. This includes the Tiltrotator, mounting brackets, CATSU hydraulic hoses, CATSU Hydraulic control system, and any other accessories provided by the manufacturer.

2. Mounting Brackets Installation: Attach the mounting brackets to the excavator arm. The exact method will depend on the excavator model and the type of brackets provided. Make sure the brackets are securely fastened and aligned correctly.

3. Tiltrotator Installation: Once the brackets are in place, you can install CATSU Tilt Rotator. This usually involves attaching it to the brackets and securing it with bolts. Make sure the tiltrotator is positioned correctly and securely fastened.

4. Hydraulic Hoses Connection: Connect the hydraulic hoses and Hydraulic Oil Fitting from the tiltrotator to the CATSU Hydraulic system. This will allow the tiltrotator to draw power from the excavator. Make sure the hoses are securely connected and there are no leaks.

5. Control System Installation: Install the CATSU Hydraulic control system in the excavator cabin. This will allow the operator to control the tiltrotator. The exact installation process will depend on the type of control system provided.

6. Testing: Once everything is installed, test the tiltrotator to make sure it's working correctly. This should involve checking the hydraulic connections for leaks, testing the control system, and making sure the tiltrotator can move in all intended directions.

7. Final Inspection: After testing, carry out a final inspection to make sure everything is secure and working correctly. If any issues are found, they should be addressed before the excavator is used for work.

Remember, these are general steps and the exact process may vary depending on the specific model of the tiltrotator and the excavator. Always refer to the manufacturer's instructions and consult a professional if you're unsure.